MT6589__samsung__SM-N900__ja3g__4.2.2__ALPS.JB3.MP.V1
Samsung Note 3 SM-N900 MT6589
Firmware Information
Brand : samsung
ProdName : ja3gxx
ProdModel : SM-N900
Device : ja3g
AndroidVer: 4.2.2
MTKxCPU : MT6589
MTKxPRJ : ALPS.JB3.MP.V1
Brand : samsung
ProdName : ja3gxx
ProdModel : SM-N900
Device : ja3g
AndroidVer: 4.2.2
MTKxCPU : MT6589
MTKxPRJ : ALPS.JB3.MP.V1
MT6589__samsung__SM-N900__ja3g__4.2.2__ALPS.JB3.MP.V1
Install Firmware
- Download and install MTK android USB drivers
- Download And Install SP Flash Tool
How To Flash Samsung Note 3 SM-N900
- First, you need to download and install sp flash tool
- Download and install MTK android USB drivers
- Then download Firmware file/Flash file/Rom for your phone
- Your phone must have 50 % charging before this process
- switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
- Now open SPflash tool.exe
- When sp flash tool open, go to download button in sp flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in sp flash tool
- Close sp flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts and might take up to 5-10 minutes. So keep patience and wait.
- See detailed Instruction MT flashing sp tool with images
ليست هناك تعليقات