1

اخر الأخبار

MT6572_NAND_samsung__SM-J100H__j13g__4.4.2__ALPS.KK1.MP7.V1

Samsung J100 Mt6572 Nand



Device Brand : samsung
Device Model : j13g
Device CPU : MT6572
Device IntName : Galaxy J1
Device Version : 4.4.2
Device Compile : 07-Oct-2015 4:05:33 AM
Device Project : ALPS.KK1.MP7.V1
Device ExtInfo : SM-J100H

MT6572_NAND_samsung__SM-J100H__j13g__4.4.2__ALPS.KK1.MP7.V1



Steps to Install Firmware

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Samsung J100

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts and might take up to 5-10 minutes. So keep patience and wait.
  15. See detailed Instruction MT flashing sp tool with images

ليست هناك تعليقات

التعليقات

إذا أعجبك محتوى مدونتنا نتمنى البقاء على تواصل دائم ، فقط قم بإدخال بريدك الإلكتروني للإشتراك في بريد المدونة السريع ليصلك جديد المدونة أولاً بأول ، كما يمكنك إرسال رساله بالضغط على الزر المجاور ...

أرشيف المدونة

جميع الحقوق محفوظة

Soft We hard

2019