فلاشه جهاز Lava Flair Z1 بصيغه pac مجربه وتعمل بكفاءه
Lava Flair Z1
Stock Rom info
- Smartphone Brand Name: Lava
- Smartphone Model Name: Flair Z1
- Cpu/Chipset: Spreadtrum (SPD)
- Firmware Factory Type: Official File
- Firmware Support Box: Smartphone Sp flash Tools Or Scatter Support OR Dongle
- Firmware Download Size: Check From Google Download server
- Firmware Using Password: No Password Applicable
- This Firmware Download Server: Direct Download Google Drive.
How to Install Spreadtrum Android USB Driver Manually
1. Go to your download option, and find the SPD USB driver folder. And you will see a zip file. So, unzip this file on your Windows computer to get the driver software.
2. Now in Windows, go to the control panel and open device manager.
3. Then click any of the device manager and at the top action menu select “Add Legacy hardware”.
4. And the “Add Legacy Hardware” wizard will open then click “Next”.
5. In the next pop up, you will see two options and select the second option that says “Install the hardware that I manually select from a list (Advance). And click the “Next” option.
6. Then from the list, select the type of hardware you are installing and click “Next”.
7. And click “Have Disk” option in the next phase.
8. Now click browse and show the driver’s .inf file from your downloaded folder.
9. Then click “Open” and “OK”. And you will see your driver listed here.
10. Now select your driver (SCI Android USB2Serial) and click “Next”.
11. And in the next option, the wizard will be ready to install. So, click “Next”.
12. Now in this option, you need to verify the signature. But click to install the driver anyway.
13. And then your driver installation will begin. Now you wait till it finishes and click “Finish”.
Then you will see the Spreadtrum driver is listed in your device manager.
ليست هناك تعليقات